This kit measures nitrite to less than 0.1 mg/L and nitrate to less than 0.2 mg/L in marine or freshwater. MultiTest™ Nitrite. Nitrate performs over 75 tests and contains a reference sample for validation.
Disinfection of drinking water is one of the major public health advances of the 20th century, however, the disinfectants themselves can react with naturally occurring materials in the water to form unintended byproducts which may pose health risks. A major challenge for water suppliers is balancing the risks from microbial pathogens and disinfection byproducts. Contaminates are in our water supply, some not regulated or adequately controlled, posing immediate health problems. People turn on their taps to drink, shower, bathe, cook, wash dishes and clothing, assuming it is safe. Bacterial contamination causes severe digestive problems, fever, nausea, diarrhea and sometimes even death. According to the EPA, total coliform and E. coli bacteria testing is recommended twice a year. Fecal coliform bacteria are mostly found in drinking water that comes from private wells and small water systems. This is partly because private water supplies, small rural public water supplies and private wells are not required by law to be tested. The PRO-LAB comes with an Optional Lab Analysis. On the petri dish the test will show columns - if you have 0 - 5 columns indicates clean water. Over 5 columns you should send in for full analysis, this kit will need to be mailed inside the included pre-stamped envelope to Pro Lab Inc's. There is a charge of $30 for the testing. Pro Lab Inc guarantees the fastest turnaround time in the laboratory testing industry!
Quickly and accurately tests pH of pond or tap water. Proper pH control is necessary to prevent harmful effects of water too alkaline or too acidic. Quickly and accurately tests for pH levels from 5.0 to 9.0. Performs 160 tests.
Pentair R151276 1200 Total Water Hardness Test Kit
Total water hardness test kit comes with total hardness in PPM or grains, test vial, 1/2-ounces No. 6, 1-ounce No. 7 and instructions, compact box. Includes 1 kit per pack. Complete 11 test lab designed for service professionals. Free, Total and Combined CI, Br, Iodine, pH, Acid Demand, Total Alkalinity, Water Hardness and Cyanuric Acid. Handy red tote box contains complete instructions, solutions and tests. Pro-Design Test Cell features CI range to 10PPM and meets recommended industry standards. Measures 5-1/2-inch length by 13-3/4-inch height by 11-1/2-inch width.
Four kits in one! Tests for magnesium through a titration based procedure in increments of 12.5 mg/L. Tests for carbonate alkalinity, borate alkalintiy and total alkalinity in 0.1 meq/L resolution through a titration based procedure. The kit resolves borate from carbonate and, along with magnesium, this presents a clear picture of the tank's buffering capacity as well as a very reliable determination of the critical carbonate content required for coral and coraline growth. Each kits can perform 75 determinations for each test.