The Nutrafin pH Wide Range Test Kit (4.5 - 9.0) will determine the general range of pH in your aquarium. Most species of fish require specific levels of pH to survive. By classifying your water as acidic or alkaline, you can create a natural habitat for your fish. Nutrafin Wide Range Test Kit is suitable for fresh and saltwater aquariums, and helps ensure optimal water conditions for your fish.
Suitable for freshwater or marine aquariums to establish the right pH range for your fish (4.5-9.0
Determines general range of pH in your aquarium
Helps you determine proper environment type for your fish
Works to provide a healthy and clean living environment for your fish
Salifert test kits are the epitome of accuracy and precision. Their wide range of available tests have all been designed to detect the smallest traces of certain elements, without interference from other chemicals within the water. Simply put, these are the best test kits you can buy- hands down. The sharp, contrasting color changes make results easy to read so there's no second guessing. Trust your aquarium to Salifert.Accurately measure the tiniest amount of nitrite without interference from amines. For saltwater or freshwater. THIS ITEM IS NOT AVAILABLE FOR BACKORDERS
Red Sea Fish Pharm ARE21455 Marine Care Program pH/Alkalinity Test Kit for Aquarium, 100 Tests
Red Sea pH/alkalinity test kit includes an accurate titration test for KH and a colorimetric test for pH for monitoring these essential parameters in all marine aquariums to an accuracy of 0.2 ppm. Performs 100-tests. It range is 7.6ppm-8.6ppm.
Salifert Copper Profi-Test Copper is often used as a treatment for parasite infested fish and it is essential that the correct concentration is used as too high levels can be toxic to marine fish and invertebrates. Tap water can also be naturally high in copper and it is therefore advisable to test for this on a regular basis. The Salifert test kit offers a very sensitive and accurate test for measuring dissolved or weakly chelated copper with a pH of 7.5-9. Lasts for several copper cures or provides sufficient for up to 50 tests on tap or aquarium water as a routine check. Ca be used for marine, fresh and garden pond water Strongly chelated copper will only be partly or not at all detected.Warning!KEEP OUT OF REACH OF CHILDREN. Not for consumption.Instructions: Add 2ml of water in the test vial. Add 5 drops of the Cu reagent and swirl gently for 5 seconds. Allow it to stand for 10 minutes. Some copper medications might use strongly bound copper and would require a waiting time of 20 minutes. In case of doubt compare the value after 10 and 20 minutes of waiting. The highest value should be noted. To obtain the copper concentration hold the test vial in front of you. Place the white part of the color chart firmly against the side of the test vial and look from the opposite side.A blue tinge lighter than the 0.1ppm value corresponds to approximately 0.05ppm.A color in between two color bars indicates a copper value in between those two values.Copper Table ml`s Added Copper Concentration in ppm 1 >=1.0 2 0.50 3 0.33 4 0.25 5 0.20 10 0.10 15 0.07 20 0.05
Ammonia and ammonium should be rapidly converted by aerobic nitrification into nitrite and then nitrate and finally into nitrogen gas. If this does not happen then either the aquarium is not fully matured or there is a problem with the tank`s biological system, which can be caused by an excessive biological loading being placed on the system. The Salifert Ammonia Test Kit measures the total amount of ammonia and ammonium quickly and accurately. Sufficient for up to 50 tests and can detect 0.5 ppm of total ammonia easily.
NYOS Calcium Reefer Test KitNYOS REEFER test kits are a very affordable, accurate, and simple to use test kit. They provide accurate test results for reef tanks when testing your parameters accurately is very important.Water properties as close to nature are the key for every aquarium's success. However, monitoring relevant parameters in seawater is difficult due to numerous interfering ions. Therefore, test kits considering the specific characteristics of seawater are needed to analyse the water precisely.NYOS REEFER test kits offer the customer two significant benefits:Highly precise analyses for seawater conditions. Furthermore, they offer a highly attractive price-performance ration and make test kits in laboratory quality affordable for the standard hobby user.Additional characteristics of our REEFER test kits: * calibrated dropper made by a German manufacturer ensures uniform drops during all repeat tests * reagents are made in Germany in accordance with EN ISO 9001 * reagents are analysed according to AAS and NIST standards * strict batch and quality control * easy to use with intuitive pictogram instructions * Made in GermanyNYOS REEFER test kits allows you to achieve precise and most importantly reproducible (i.e. in repeat measurements identical) measuring results.High sensitivity seawater calcium test kit * easy conversion factor * accurately to 5mg/l * precise dosing tip * precise colour change * separate indicator and titration solutionNumber of Tests: 50
Salifert Silicate Profi-Test Silicate occurs in tap water or purified water when the reverse osmosis or de ionizing unit is not functioning properly. Silicate can result in diatom bloom and can block some essential trace elements such as vanadium and molybdenum. The Salifert Test kit for silicate is a very fast, sensitive and accurate test, with two scales: an ultra low scale which is particularly useful for marine water and a high scale which is suitable for freshwater environments. Sufficient for 60 tests. Can be used for marine, fresh and garden pond waterErroneous results might be obtained when the carbonate hardness is higher that 20dKH. This corresponds to an alkalinity of 7meq/l. Normally the carbonate hardness is well below the above mentioned values.Warning!KEEP OUT OF REACH OF CHILDREN. In case of contact with the skin, wash with plenty of water. In case of contact with eyes, was heyes with plenty of water and consult a physician immediately.Si-1 and Si-2 are acidic and Si-3 contains a reducing agent. Not for consumption.Instructions: Add with syringe 10ml of water in the test vial (low resolution mode 1ml) Add to this 4 drops of Si-1 (low resolution 2 drops) reagent and swirl the test vial gently for 10 seconds. Allow to stand for 5 minutes. Add to this 4 drops of Si-2 (low resolution 2 drops) reagent and swirl the contents gently for 30 seconds. Add to this 1 level scoop of Si-3 reagent and swirl the test vial for 20 seconds. Place the open test vial on top of the color chart on a part of the chart which is white and compare the colors looking from above. Read the corresponding dissolved silicon content. An intermediate color corresponds to an intermediate dissolved silicon content.Note: If the low resolution mode was used then multiply the values on the color chart by 10.The silicate values are in ppm (mg/l) siliconoxide. To convert the values from ppm siliconoxide to ppm silicon multiply the value by 2.1.Avoid using tap water or