Nitrate is one of the final products of biological removal of ammonia. While it is not toxic, levels above 10 PPM will inhibit coral growth and may irritate invertebrates. High levels will indicate not enough water changes, too high a fish load or in marine applications, not enough area for denitrifying bacteria to live. This test kit includes a test vial, two reagents and a color chart to determine the amount of total nitrate in the aquarium. There are two scales on the chart measuring 0.2 to 10 PPM and 2 to 100 PPM (Mg/L). This test kit will do 50 tests.
The nitrate test kit provides fast and precise nitrate measurements
The nitrate test kit can perform up to 60 tests
The nitrate test kit comes with reagents analytic, grade glass vials, and a calorimetric comparator
Product Information Specifications for Salifert Nitrate Test Kit Below:
Installation: 1. For aquarium in-door use only. 2. Check power supply, power outlet, and voltage in comply with rated values. 3. To set desired temperature, turn the adjustment knob of Thermostat to the desired temperature. 4. Put Heater into aquarium, submerged in full, at a position with good water circulation. (Refer Figure) Note: 1. Fix Heater body with suction cup into water. 2. Plug Thermostat into Power outlet, the pilot green will come on. The pilot red light will come on for timer the heater is heating. Temperature is achieved when heat source light turns on and off. 3. To avoid inaccurate detection, the Heater must be completely immersed in the water. 4. Do not mount Thermostat in areas subject shock, vibration, high temperature, moisture, or rain. In case Thermostat body dropped into water or invaded by water, disconnect the power as soon as possible, and then bring this product to authorized shop for repair. 5. For your safe and avoid the dangerous, please cut off the power before changing water and off the aquarium and wait for 15 minutes to move. 6. The most depth it can reach is 1 meter. 7. In order to ensure safety reason, please pay attention to the change of the temperature in the water for the first 2 days. 8. For safety reason, please don't disassembly the Thermostat or Heater by yourself.
Aquarium Planted Tank DIY CO2 System D301 CO2 Generator
Brand: PET LOVER STATION
Feature: Ã¢-Promoting plants growing, easy to set up, low cost, safe. Ã¢-With 2 air-pipe locks on the bottle cap, prevent the air-pipe get loose. Ã¢-Specialized pressure gauge, safe area and scale can be seen clearly. Ã¢-The complete DIY CO2 kit combo for planted aquarium. You can built up your CO2 system within 15 mins. Ã¢-This bottle cap is very well suitable to be DIY CO2 system 's accessory that the size fits common PET plastic bottle. Attention: Ã¢-The bottle have to use carbonated beverage bottle, do not use pulpy, green tea, mineral water bottles, etc. Ã¢-Trimming valve regulation avoid by sudden big or small, do not suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle. Ã¢-Make sure carefully observe the direction of the parts before assembly. The usual wrong handle way will cause abnormal react ion components as follow: the contrary direction of the check valve and fine-tuning in the direct. Product Attributes: Model: D301 Model Thumbnail Vavle Pressure Gage Cover Tube D201 D301 D501 Package Include: 1x Pro needle valve 1x Pressure gauge 1x Extra tube 2x Bottle caps with tubes 2x Tube holder If you want to set up the Generator ,you need (not included in the product): 1x 200g of citric acid 1x 200g baking soda powder 2 x Soft drink bottle (recomended 2L bottle) Note: 2.Due to the light and screen difference, the item 's color may be slightly different from the pictures. Please understand. Make sure you ...
Large LCD Display simultaneously showing aquarium and ambient temperature.Aquarium Thermometer is water resist, wirelss with integrate probe, ideal for salt or fresh water enviroment.With adhesive tape at back side for easy puting on Aquarium tank.
HK LCD Digital Fish Tank Wireless Sensor Out Aquarium Thermometer Marine KT-500
This item is without retail box.
Large LCD display showing aquarium temperature.
Selectable temperature unit: â„ƒ or â„‰.
With adhesive tape at back side for easy putting on aquarium tank.
Temperature: -9.9 - 99.9 â„ƒ (14 - 244â„‰).
Accuracy: +/- 1 â„ƒ.
Power supply: 1.5V LR44 (Battery included).
Weight: 58 g
Size: 8 * 6.8 * 1.5 cm
1 Ã— KT-500 Digital Aquarium Thermometer