The Bresle Chloride Test Kit is one of the most popular tests for extracting and measuring the salt contamination on blast-cleaned substrates. This Chloride Test on steel or Salt Test on steel using the Bresle Patch or Bresle Sampler method will help to prevent coating failure due to salts such as chlorides and sulphates contaminating the surface prior to the coating application. This contamination can be tested quickly and simply using the Bresle Test. Easy to use, pour 10mls of distilled water into the beaker and determine the conductivity using the Conductivity Meter. Take a Bresle Patch and apply to the test surface. Fill the syringe with 2.5mls of test water and insert through the adhesive foam into the test chamber. Inject the contents, then extract back into the syringe. Repeat ten cycles of injecting and extracting, then transfer the test water back into the beaker. Measure the test water with the Conductivity Meter and deduct the initial conductivity reading from the result. Multiply the readings by 0.4 to give the quantity of salts in g/cm also known as ppm, or by 4 for the quantity of salts g/m. The maximum permissible surface density of salts on the steel surface prior to surface treatment depends on the type of paint to be applied and what the finished material or product is to be used for. Surface treatment specifications must, therefore, state the highest permissible surface density of salts for each particular application. Complies with International Standards: ISO 8502-6 and ISO 8502-9. Additional packs of Bresle Patches can be purchased to carry out further tests using this kit. Supplied with 50 Bresle Patches, Conductivity Meter, Calibration Solution, 3 5ml Syringes, 25ml Beaker, 250ml Distilled Water and Carrying Case.
Patches Supplied : 50 Standard & 50 High Adhesion
Conductivity Meter Range : 0-199S/cm - 0.20-1.99S/cm
Conductivity Meter Resol : 1S/cm - 0.01mS/cm
Conductivity Meter Accuracy : 2%
Kit Contents: Supplied with 100 Bresle Patches, Conductivity Meter, Calibration Solution, 3 5ml Syringes, 25ml Beaker, 500ml Distilled Water and Industrial Foam-Filled Carrying Case.
Complies with International Standards: ISO 8502-6 and ISO 8502-9.
Additional packs of Bresle Patches (Bresle Samplers) can be purchased to carry out further tests using this kit.
Product Information Specifications for Bresle Chloride Test Kit Below:
The Allegro Flow Test Kit with CFM tester checks the volume of air that gets to the respirator. A flow meter simply quick connects onto an airline hose to check the respirator system for NIOSH compliant air flows. The kit contains flow meter and a full assortment of quick connect plugs and adapters to fit all respirator manufacturer's airline hoses. This is excellent for use with ambient air pumps. NOTE: NIOSH mandates 4 CFM for tight-fitting masks and 6 CFM for hoods.Do you order this product often and/or in large quantities? Check out our Large Order Program to save yourself time and money.If this isn't what you're looking for, please check out the rest of our supplied air respirator category.
Manufacturer: Wildlife Supply Company
Brand: Wildlife Supply Company
4120-A15 Ammonia Nitrogen KitFor fresh or salt water, this Nessler Method kit contains octa-slide and enough reagent for 50 tests. Range is 0.2 - 3.0 (0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 3.0) ppm NH3-N, which is frequently used in aquaculture. Above image may vary.
Technical Specification Item Arsenic Test Kit Type Test Kit Range 0.05 - 0.5 mg/L Sensitivity 0.05 mg/L Number of Tests 100 Includes Reagents Compliance & Restrictions Compliance and Restrictions Hazardous material - Other Regulated Material This item has been restricted from sale in the following states: CA. This listing is for each. _DELETE_
The Aqua Medic Calcium Reactor 1000 is a closed system designed for universal use. It can be operated on a bypass system, independent of the water level in the aquarium, or alternatively be installed in the filter sump. It includes a large volume (10 liters or c. 2.5 gallons) of Hydrocarbonate and an integrated circulation pump that features the patented Aqua Medic needle wheel. By adding CO2, the pH value in the Calcium Reactor falls and the Hydrocarbonate is dissolved. Even with a low flow rate of 1 to 4 l/hr (c. 0,25 to 1 gph), a large amount of dissolved calcium enters into the aquarium, which is assimilated by the animals. The Calcium Reactor 1000 has an integral port to accommodate a PG 13.5 threaded electrode to measure the pH value.
Manufacturer: Digital Aquatics
Brand: Digital Aquatics
The DCI is designed to integrate 2-24v Dc pumps that use round 3 pin connectors into your system. for use with the Reef Keeper Family, the DCI requires the addition of the APC (Advanced Pump Control). This interface can also be used on any controller that has 0-10v outputs.
** Note - The DCI does not count against the module count as it is an interface for the APC**
Neptune Systems Double Junction Lab Grade PH Probe
Manufacturer: Neptune Systems
Brand: Neptune Systems
Neptune's Double Junction pH Probe is compatible with any monitor or controller with a BNC style connection. If you just need to replace your worn out probe or add another you will not be disappointed with the double junction feature of these probes. Most probes have a single chamber to house the actual reference probe and fluid that can become contaminated quickly throwing off readings and requiring calibration quite often. The double junction probes have two chambers that keeps any contaminants that could possibly react with and clog the actual sensing portion of the probe.Whats Included1x Double Junction Lab Grade pH probe w/ 10' cord
American Marine PINPOINTÂ Conductivity MonitorPINPOINT Conductivity Monitor is an instrument for the measurement of hardness in freshwater. The conversions are 33 ÂµS=17.9 ppm=1dH. Good quality reverse osmosis water measures 5-15 ÂµS, while de-ionized water measures 0-1 ÂµS. The Conductivity Monitor is automatically temperature-compensated and has two ranges, making it useful for different applications.The freshwater hobbyist will appreciate the instant readings for precise hardness. The saltwater hobbyist will use the PINPOINT Conductivity Monitor to assess the purity of deionized and reverse osmosis water. Given proper care, the PINPOINT Conductivity Monitor should last a lifetime. PINPOINT Conductivity Probe is permanent and may never require replacement. Powered by a standard 9-volt battery (not included). Optional AC Adaptor Kit Additional 45 ÂµS calibration fluid 2 year manufacturer`s warranty
Manufacturer: Holland Bar Stool Co.
Brand: Holland Bar Stool Co.
Customize your very own bar stool with the help of Holland Bar Stool Co.! This stationary bar stool has a contemporary design and provides superb back support. Our Hampton Series products are made from solid beech, strong enough to withstand the rigors of commercial usage. These stools are perfect for the individual who wants style and reliability at an affordable price. The construction of our Hampton series is as strong as they come, with metal corner brackets that provide additional support and joints that are first epoxy glued, and then screwed. Along with the steam bent solid frame, this all adds up to one tough piece of art. Proudly made in the USA. Get your perfect bar stool today from Holland Bar Stool.
Tropic Marin ATM28300 Test Set Expert Kit for Aquarium
Manufacturer: TopDawg Pet Supply
Brand: Tropic Marin
For the determination of vital water values in seawater aquaria. This set contains important tests for a fast and accurate determination of specific water values, which have a decisive effect on the well being of fish and invertebrates in seawater aquaria.