To Please Your Water Pets - Want your love tropical fish and other water pets to be happy and active all the time? - Get them a aquarium thermostat heater!
Milocos new arrival of 300W submersible heater is able to auto adjust the temperature increasing speed according to the changes of heating temperature, since it adopted smart thermostat chip and precise induction probe, allowing your fish to gradually adapt in relatively mild water. automatically heats the water to the set temperature when the actual temperature in tank is 2â„ƒ/3.6â„‰ less than the Pre-set value (68â„‰- 93â„‰). perfect for most 120-250L aquarium and fish tank.
Pets Friendly Protection This heater has built-in auto power off function in water-shortage and out-of-water conditions as well as over-temperature protection, while the eco-friendly heat resistant plastic sheathing and shatterproof glass tube that ensures no harm to your water pets, creating a safe and comfortable environment whether in deep autumn or winter. (PS: the heating speed will slow down in an extremely colder external ambient temperature.)
Important Notes: 1. PLS cut off the power before your hands putting in water. 2. Cut off the power supply and wait for the cooling of the heater before you clean the aquarium/heater. 3. Keep the heater fully into water for 10mins to adapt to the current temperature of the aquarium when in use. 4. The heater must be fully submerged in water during use and the water line should be at least 1.2 inches.
Specification: Power: 300W Voltage: 110-120V 50-60Hz Rated Current: less than 30mA Temperature Control Range: 68â„‰-93â„‰ Power Cord Length: 6ft Waterproof Rate: IP68 Tank Capacity: 120-250 L / 50-70 (US gal) Suitable Fish Tank: 47-63 inches Product Dimension: 14.8"x1.2"x1.2" Material: Metal Probe + Quartz Glass + Plastic
Allow Water Pets Lively Swim - adopts high-efficiency heating pipe and precise induction probe, auto warming up the water to the Pre-Set Temp that make your tropical fish enjoy happy and vivid movement, Say Goodbye to lifeless deep autumn and cold winter
Smart Induction Thermostat - built-in imported smart chip and probes, automatically heats the water to the set temperature when the actual temperature in tank is 2â„ƒ/3.6â„‰ less than the Pre-set value (68â„‰- 93â„‰). Importantly, it self-adjusts the heating speed based on the changing temperature
Safety Protection - Auto Power-off in out-of-water and water shortage conditions, also built-in Over-Temperature Protection (blue light's on) stops heating immediately, creating a safer and more comfortable aquarium environment for your love fish, turtles or other water pets
Everything's in Sight - clear visible LED digital readout provides an intuitive and easy way to understand the heater operation, bringing more convenience to customize the thermostat value based on various aquariums (120-250L), ornamental fishes, amphibians turtles, etc
Outstanding Treatment - made of anti-explosion quartz glass tube with heat-resistant plastic sheathing and IP68 double sealing treatment tech, better avoid water seepage due to fish collision to ensure long lasting
Product Information Specifications for Milocos 300W Submersible Aquarium Heater with Visible Temperature, Heaters for Fish Tanks Auto built-in Thermostat with Suction Cup Heating Rod Below:
Penn-Plax Cascade Heat Aquarium Heaters accurately maintain the desired temperature in your tank. Available in sizes to match the size and volume of your tank, these heaters are factory preset to 76 degrees Fahrenheit making them ready to use in most aquatic environments. Can be set to your desired temperature using the visible temperature setting scale and is accurate to 1 degree Fahrenheit. Just plug it in and these heaters will safely and efficiently bring the temperature to your set level. Fully submersible, these heaters can be placed horizontally or vertically in your tank and will automatically maintain the desired temperature level. Made with superior insulation, these heaters provide excellent heat distribution over the entire element. The heavy duty shock-resistant glass gives these heaters a long life and makes them safe for your aquarium and your pets. Each heater comes with two suction cups for easy and secure placement in your aquarium.
Give your pet the extra heat it needs. Fluker's Heat Mat's durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet's enclosure. Can be mounted under or on side of your pet's enclosure. **If mounted below enclosure, make sure there is only a thin layer of substrate in tank and there is proper ventilation to prevent heat buildup which can damage your enclosure or create a fire hazard. Side mounting is recommended for enclosures with no bottom ventiliation and/or thick or heavy substrate.**
Neptune Systems AquaController Apex Temperature Probe
Long-life Temperature Probe
Neptune Systems manufactures its own temperature probes in-house. Why? Because we saw the level of early failures due to using off-the-shelf temperature probes like those used in stand-alone digital thermometers as well as those used by other aquarium controllers. These probes often fail because they were never designed to be permanently submersed in saltwater. We custom build our temperature probes using a proprietary method that encapsulates the business end of the probe itself from the corrosive effects of long term saltwater submersion.
CNZ Aquarium Quartz Glass Submersible Heaters, 200 W
High quality, break resistant quartz glass construction fully submersible simple installation available in a variety of sizes suction cups for securing to the aquarium visible temperature setting for use in fresh and saltwater. Two suction-cup clamps included. 5-1/2 ft. Cord.
Specification: Power: 300W Voltage: 110-120V 50-60HZ Temperature Control Range: 681â„‰~93â„‰/16Â°C~34Â°C Power Cord Length: 55.1" Waterproof Rate: IP68 Tank Capacity: 200-250 L/50-70 Gallon Suitable Fish Tank: 47-55 inches Product Dimension: 15.16"x1.2"x1.2" / 38.5x3x3 cm Material: Metal Probe + Quartz Glass + Plastic Operation instruction: The heater should be immersed into water completely. It takes about 10~15 minutes to get used to the water temperature. Then adjust and set the desired temperature value. It starts to work if the actual temperature value is lower than the settled value, unless it doesn't work. Important Notes: 1.Pls cut off the power before your hands putting in water. 2.Cut off the power supply and leave the heater cool before you cleaning the aquarium/heater. 3.The heater must be fully submerged in water during use and the water line should be at least 1.2 inches. 4.Before using, please check if the heater is in good condition. If the glass part of the heater is cracked or other parts are spoiled, do not use it. 5.Non professionals do not take the Heater out of the protective sleeve.
Features: -Made from high strength quartz explosion-proof glass and high-efficiency heating wire, can bear huge heat difference and not break, fast heat transfer. -Anti-explosion quartz glass tube with heat-resistant plastic sheathing and IP68 double sealing treatment tech, better avoid water seepage due to fish collision to ensure long lasting. -Stepwise heating and evenly heating to prevent too fast to cause your fish discomfort. -Auto power-off in out-of-water and water shortage conditions, also built-in Over-Temperature Protection (indicator light's on) stops heating immediately, creating a safer and more comfortable aquarium environment for your love fish, turtles or other water pets. -This fully submersible glass heater offers simple and easy installation with the use of the included suction cups and can handle aquariums up to 26-gallons. -Maintain constant and stable temperatures for your aquatic creatures to thrive. NOTE: -While the heater is put in your aquarium, it must be submerged fully, and near the water circulation place. The fish tank water line can't be less than the knob head position, and with two suction cups fixed. -Please cut off the power before your hands putting in water. -The heating rod won't work(the indicator light will be off) if the water temperature is more than 93â„‰. -To avoid inaccurate heating, the heating rod can't be inserted into the sand. Specification: Material: Metal Probe + Quartz Glass + Plastic Item length: 11.0 i...