Specification: Power: 300W Voltage: 110-120V 50-60HZ Temperature Control Range: 681â„‰~93â„‰/16Â°C~34Â°C Power Cord Length: 55.1" Waterproof Rate: IP68 Tank Capacity: 200-250 L/50-70 Gallon Suitable Fish Tank: 47-55 inches Product Dimension: 15.16"x1.2"x1.2" / 38.5x3x3 cm Material: Metal Probe + Quartz Glass + Plastic
Operation instruction: The heater should be immersed into water completely. It takes about 10~15 minutes to get used to the water temperature. Then adjust and set the desired temperature value. It starts to work if the actual temperature value is lower than the settled value, unless it doesn't work.
Important Notes: 1.Pls cut off the power before your hands putting in water. 2.Cut off the power supply and leave the heater cool before you cleaning the aquarium/heater. 3.The heater must be fully submerged in water during use and the water line should be at least 1.2 inches. 4.Before using, please check if the heater is in good condition. If the glass part of the heater is cracked or other parts are spoiled, do not use it. 5.Non professionals do not take the Heater out of the protective sleeve.
Material: High strength quartz explosion proof glass--Dissipate Heat fast, Accurate temperature control
Fully submersible, apply to saltwater and fresh water, Suitable for aquariums 50-70 gallons(200-250 liters)
Accurate temperature control,Durable and Intelligent constant temperature, temperature adjustment range: 16-34 degree/61-93Â°F
Waterproof and double sealed material--plastic and black protective container for scald-preventing and anti punching
300W, Length of Heater is 15.16", Power Cord Length is 55.1", Voltage: 110-120V 50-60HZ
Product Information Specifications for Wolfride 300W Submersible Aquarium Heater Fish Tank Auto Thermostat Heater with Protective Sleeve Below:
Features: -Made from high strength quartz explosion-proof glass and high-efficiency heating wire, can bear huge heat difference and not break, fast heat transfer. -Anti-explosion quartz glass tube with heat-resistant plastic sheathing and IP68 double sealing treatment tech, better avoid water seepage due to fish collision to ensure long lasting. -Stepwise heating and evenly heating to prevent too fast to cause your fish discomfort. -Auto power-off in out-of-water and water shortage conditions, also built-in Over-Temperature Protection (indicator light's on) stops heating immediately, creating a safer and more comfortable aquarium environment for your love fish, turtles or other water pets. -This fully submersible glass heater offers simple and easy installation with the use of the included suction cups and can handle aquariums up to 26-gallons. -Maintain constant and stable temperatures for your aquatic creatures to thrive. NOTE: -While the heater is put in your aquarium, it must be submerged fully, and near the water circulation place. The fish tank water line can't be less than the knob head position, and with two suction cups fixed. -Please cut off the power before your hands putting in water. -The heating rod won't work(the indicator light will be off) if the water temperature is more than 93â„‰. -To avoid inaccurate heating, the heating rod can't be inserted into the sand. Specification: Material: Metal Probe + Quartz Glass + Plastic Item length: 11.0 i...
Powerful 200-watt Marina Submersible Aquarium Heater provides reliable heating for fresh or saltwater aquariums up to 55 US gallon aquariums. The heater includes many practical features for easy use, safety and convenience, including an easy-to-access temperature set dial, on/off pilot light indicator and a bumper guard for fish safety. Made of durable high-impact glass, it's built to last under normal aquatic conditions.
Manufacturer: Exo Terra
Brand: Exo Terra
The Exo Terra Reptile Heatwave Rock Electronic Heat Stone simulates a stone heated by the sun. Various reptiles, including nocturnal, use this form of conductive heat for thermoregulation which is important for metabolism and digestion. The Exo Terra Reptile Heatwave Rock Electronic Heat Stone automatically shuts off when a certain surface temperature is reached to prevent burns or overheating. The fully-encased electronically controlled heating element covers the stone to prevent hot spots. The special thermal conductive resin is waterproof, non-toxic, easy to clean and ensures an even heat distribution. Natural looking, the Exo Terra Reptile Heatwave Rock Electronic Heat Stones are available in three sizes and are easy to integrate in any terrarium set-up, humid or dry.
Manufacturer: Prime Pet Deals - Code 2
Allows precise monitoring of both the temperature and humidity of your terrarium from one unit. Temperature and humidity levels are extremely important to the long term heath of your animals. Velcro backing enables easy removal for cleaning or relocation. .
WOLFWILL 25W Aquarium Heater Submersible Fish Tank Auto built-in Thermostat with Suction Cup Heating Rod
Safety Working Made of reinforced PBT plastic and Nano smooth surface with IP68 fully submersible, scald-proof and shatterproof design, the heater is well electric insulated and thermo stable. It also built-in auto power-off protection in the condition of out-of-water or low water level, perfect for most aquarium, fishbowl, turtle tank and other water containers up to 20L capacity. Important Notes: 1. PLS cut off the power before your hands putting in water. 2. Cut off the power supply and wait for the cooling of the heater before you clean the aquarium/heater. 3. The heater must be fully submerged in water during use and the water line should be at least 3cm.
Submersible Aquarium Heater, Rusee Glass 300-watt for Freshwater Aquarium and Saltwater Aquarium Supplies Fish Tank Heating Rods Heater with Built-In Smart Automatic Thermostat
Why Choose Our 300W Submersible Aquarium Heater?Operation functionA. After the temperature control system is installed, put it into the aquarium and wait 15 minutes,then turn on the power, adjust the temperature by the adjust ring.The light is on means it's heating, and off means stop.B. When the temperature is disaccord with the scale after 1-2 days, you can make fine-tuning on it.Adjust ways1. Please test the temperature by precision thermometer.2. Turn the arrowhead to 18â„ƒ.3. Turn the adjust ring clockwise slowly, and stop when the light is on.4. Pull up the proofread button lightly, turn the adjust ring, make the arrowhead aim at the real degree, then press down the proofread button. 5. Finish adjust, can setup the expected temperature again.(26â„ƒ better)Specificationâ€¢ Material: Plastic glassâ€¢ Aquarium Heater Length: 33cmâ€¢ Wattage : 300Wâ€¢ Temperature Range ï¼š20â„ƒ~34â„ƒ(65Â°F~93Â°F)â€¢ Cable Length: 190cm
The aquarium pond fish tank water heater is to keep the water temperature inside the tank steady and even allow temperature distribution in larger aquariums. Most tropical fish are warm water fish and need a constant warm temperature in the aquarium for the fish to be healthy. Aquarium water heater is used for keeping water stable so as to provide the best suited environment for the fish. Safely increase the water temperature in your small glass or acrylic marine or tropical aquarium by a few degrees. Make sure you get this water heater that is going to be big enough to adequately heat the water of your home aquarium. Features: 1. Maintain constant and stable temperatures for your aquatic creatures to thrive with this Bestgoo 300w double sealed aquarium heater. 2. This fully submersible glass heater offers simple and easy installation with the use of the included suction cups and can handle water bettwen 26-60 gallon. 3. Great for both fresh water and marine water aquariums, aquaculture, terrariums & hydroponic systems! 4. Maximum strength Quartz Silica Tube is shatter resistant & more durable than conventional glass heaters. 5. Provides accurate thermal control. Set and adjust the desired temperature with the use of the Temperature Controller on the top. This allows accurate thermal control via the easy set thermostat for precise adjustments. Specification: Range of the adjustable temperature: 20-34Â°C / 65-93 F Power: 300W Voltage: 110V-120V Weight: 245g / 0.54 lb Heater ...
Manufacturer: Exo Terra
Brand: Exo Terra
Color: Blacks & Grays
The Exo Terra Heater Cable features double silicon insulation and allows you to provide heat right where necessary. It is best used underneath the Exo Terra Terrarium to heat specific spots on the terrarium floor or it can be used in breeder racks to heat multiple enclosures. The flexible, water-resistant, and durable Exo Terra Heater Cable has numerous uses for the professional or the hobbyist.