Ammonia and ammonium should be rapidly converted by aerobic nitrification into nitrite and then nitrate and finally into nitrogen gas. If this does not happen then either the aquarium is not fully matured or there is a problem with the tank`s biological system, which can be caused by an excessive biological loading being placed on the system. The Salifert Ammonia Test Kit measures the total amount of ammonia and ammonium quickly and accurately. Sufficient for up to 50 tests and can detect 0.5 ppm of total ammonia easily.
Ammonia and ammonium should be rapidly converted by aerobic nitrification into nitrite and then nitr
The Salifert Ammonia Test Kit measures the total amount of ammonia and ammonium quickly and accurate
Sufficient for up to 50 tests and can detect 0.5 ppm of total ammonia easily.
NYOS Calcium Reefer Test KitNYOS REEFER test kits are a very affordable, accurate, and simple to use test kit. They provide accurate test results for reef tanks when testing your parameters accurately is very important.Water properties as close to nature are the key for every aquarium's success. However, monitoring relevant parameters in seawater is difficult due to numerous interfering ions. Therefore, test kits considering the specific characteristics of seawater are needed to analyse the water precisely.NYOS REEFER test kits offer the customer two significant benefits:Highly precise analyses for seawater conditions. Furthermore, they offer a highly attractive price-performance ration and make test kits in laboratory quality affordable for the standard hobby user.Additional characteristics of our REEFER test kits: * calibrated dropper made by a German manufacturer ensures uniform drops during all repeat tests * reagents are made in Germany in accordance with EN ISO 9001 * reagents are analysed according to AAS and NIST standards * strict batch and quality control * easy to use with intuitive pictogram instructions * Made in GermanyNYOS REEFER test kits allows you to achieve precise and most importantly reproducible (i.e. in repeat measurements identical) measuring results.High sensitivity seawater calcium test kit * easy conversion factor * accurately to 5mg/l * precise dosing tip * precise colour change * separate indicator and titration solutionNumber of Tests: 50
Salifert Silicate Profi-Test Silicate occurs in tap water or purified water when the reverse osmosis or de ionizing unit is not functioning properly. Silicate can result in diatom bloom and can block some essential trace elements such as vanadium and molybdenum. The Salifert Test kit for silicate is a very fast, sensitive and accurate test, with two scales: an ultra low scale which is particularly useful for marine water and a high scale which is suitable for freshwater environments. Sufficient for 60 tests. Can be used for marine, fresh and garden pond waterErroneous results might be obtained when the carbonate hardness is higher that 20dKH. This corresponds to an alkalinity of 7meq/l. Normally the carbonate hardness is well below the above mentioned values.Warning!KEEP OUT OF REACH OF CHILDREN. In case of contact with the skin, wash with plenty of water. In case of contact with eyes, was heyes with plenty of water and consult a physician immediately.Si-1 and Si-2 are acidic and Si-3 contains a reducing agent. Not for consumption.Instructions: Add with syringe 10ml of water in the test vial (low resolution mode 1ml) Add to this 4 drops of Si-1 (low resolution 2 drops) reagent and swirl the test vial gently for 10 seconds. Allow to stand for 5 minutes. Add to this 4 drops of Si-2 (low resolution 2 drops) reagent and swirl the contents gently for 30 seconds. Add to this 1 level scoop of Si-3 reagent and swirl the test vial for 20 seconds. Place the open test vial on top of the color chart on a part of the chart which is white and compare the colors looking from above. Read the corresponding dissolved silicon content. An intermediate color corresponds to an intermediate dissolved silicon content.Note: If the low resolution mode was used then multiply the values on the color chart by 10.The silicate values are in ppm (mg/l) siliconoxide. To convert the values from ppm siliconoxide to ppm silicon multiply the value by 2.1.Avoid using tap water or
Manufacturer: Rolf C. Hagen (USA) Corp.
Laguna Phosphate Control naturally improves pond water clarity and overall pond conditions. Phosphate is a major nutrient that can stimulate undesirable pond conditions that result in unclear water. Micro-organisms in Phosphate Control's super-concentrated formula reduce phosphate levels. Phosphate Control contains a combination of powerful bacterial teams found in nature that improve water conditions for pond inhabitants. One 2.1 quart bottle treats 10,566 gallons of pond water.
Lifegard Test Strips Aquatics 6 Way All Purpose Test Kit
Manufacturer: Bel-Aqua Pools Supply Inc.
Brand: Lifegard Test Strips
Lifegard Aquatics offers a complete line of custom designed test strips for all important testing of Fresh or Saltwater Aquariums or Garden Pond water. These state of the art strips help ensure proper water environment for your indoor or outdoor fish and plants. Each vial features a leak proof, hinged pop-top lid and a wrap around desiccant liner to protect strips from moisture intrusion.
Calibrated droppers: our bottles are designed to provide a consistent drop size, which is a key element in testing - regardless of who is squeezing the bottle the drop remains consistent. Many less expensive brands will rely on the cheapest possible bottles, syringes and tips that can easily skew the test results.
The Nutrafin pH Low Range Freshwater Aquarium Test Kit offers a full complement of test equipment: test pipette; glass test tube and cap, lab base, instruction booklet. The test is essential to be able to establish correct pH range(6.0-7.6) required by fish and plants. The pH value is directly implicated in ammonia toxicity.