Salifert aquarium water test kits are the epitome of accuracy and precision. Their wide range of available tests have all been designed to detect the smallest traces of certain elements, without interference from other chemicals within the water. Simply put, these are the best test kits you can buy- hands down. The sharp, contrasting color changes make results easy to read so there's no second guessing. Trust your aquarium to Salifert. Detects small changes in carbonate hardness which can affect pH and the growth of both fish and coral.
Salifert Magnesium Profi-Test Magnesium is present in natural sea water in a fairly high concentration (1350 - 1500 mg/L) and is an essential element of chlorophyll which is necessary for photosynthesis. Without photosynthesis plants, algae and coral would not be able to survive. Magnesium also helps to maintain the correct combination of calcium concentration and alkalinity as it slows down the formation of calcium carbonate which can absorb many important trace elements within the aquarium. Maintaining a correct magnesium concentration is therefore very important and is indirectly responsible for fast coral and calcareous algae growth by making it possible to maintain correct calcium and alkalinity figures. Magnesium is depleted by algae growth and also by the use of excessive kalkwasser or by going far beyond natural calcium, alkalinity and pH values. The Salifert Magnesium Profi-Test is easy to use and accurate with measurements in steps of 30 mg/L. Results are not affected by strontium and calcium interference. Can be used for marine water only. Calcium and strontium will not interfere when their total concentration is between 200 and 650 ppm. This is mostly the case. Up to 50 tests.Warning!Keep out of reach of children. Not for consumption.
Alkalinity and calcium are needed to form the skeletal material of corals.
Alkalinity and calcium are not the only substance needed to form the skeletal material of corals.
Maintaining a correct magnesium concentration is very important and is indirectly responsible for coral growth. Magnesium is depleted by algae growth and also by the use of excessive kalkwasser.
Magnesium is present in natural sea water in a fairly high concentration (1350 - 1500 mg/L) and is a Magnesium also helps to maintain the correct combination of calcium concentration and alkalinity.
The Salifert Combo Test Kit is sensitive enough to detect small changes in levels of alkalinity, calcium and magnesium. The test kit is easy to use and accurate.
Product Information Specifications for Salifert Alkalinity Calcium Magnesium Combo Test Kit Below:
Neptune Systems AquaController Apex Display Module
Manufacturer: Neptune Systems
Mechanical, not membrane keypad
Our Display Module uses high-quality, mechanical buttons. So what you say? Well many devices out there make use of what are called capacitive touch pads. This type of membrane button is just fine for your toaster oven, but in a saltwater environment it is highly susceptible to failure. So, even though the cost to us was higher, we went with mechanical buttons for our Display Module ensuring your product a much longer life.
Adjustable contrast, high-resolution,
backlit graphic display
While some may tout the importance of a color display, we disagree. We believe the most important thing for our customers is ease in readability and size of the display. What good is a color display if it is barely larger than a postage stamp. That is why we went with the backlit graphical display we did. It was the perfect match of function and value for our customers.
Built-In Speaker Plays Multiple Alarm Tones
Inside the Apex Display Module is a tiny speaker with a big heart. This speaker will play one of many alarm sounds and tunes that are built into the Apex. These alarms are perfect to alert you of a water leak, over temp, or whatever you condition you desire to program into the Apex.
Multiple Display Module Capability
With the Apex Display Module you are not limited to having just one control panel. With the Apex (as an option) you can add one, two, even three control panels all to the same Apex. And, these are not watered down, smaller versions of the ...
Neptune Systems AquaController Apex PM1 PH/ORP Temp Probe Module
Manufacturer: Neptune Systems
Brand: Neptune Systems
Neptune Probe Module PM1 is for PH, ORP, and Temperature.Apex PM1 module by Neptune Systems is designed to control or add PH, ORP, or Temperature probes to your Apex controller. * Monitor/Control pH or ORP, and temperature. * 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc. * Full datalogging support in Apex Base module. * Up to 240 AquaBus modules can be added to the Apex system. * Plug and Play. Automatically recognized when installed into the system. * Two AquaBus connectors for flexible expansion via AquaBus * Led Status Indicator * Upgradeable firmware. * Compatible with all Apex systems. * Galvanic Isolation for accurate and reliable probe readings. * Comes with 3' AquaBus cable.
NYOS MAGNESIUM REEFER TEST KITNYOS Reefer Magnesium test kits are very accurate and use just small amounts of solution making the test even more simple. If you need an accurate test kit for your reef tank the NYOS Reefer test kits are perfect for your aquarium.Water properties as close to nature are the key for every aquarium's success. However, monitoring relevant parameters in seawater is difficult due to numerous interfering ions. Therefore, test kits considering the specific characteristics of seawater are needed to analyse the water precisely.NYOS REEFER test kits offer the customer two significant benefits:Highly precise analyses for seawater conditions. Furthermore, they offer a highly attractive price-performance ration and make test kits in laboratoryquality affordable for the standard hobby user.Additional characteristics of our REEFER test kits: * calibrated dropper made by a German manufacturer ensures uniform drops during all repeat tests * reagents are made in Germany in accordance with EN ISO 9001 * reagents are analysed according to AAS and NIST standards * strict batch and quality control * easy to use with intuitive pictogram instructions * Made in GermanyNYOS REEFER test kits allows you to achieve precise and most importantly reproducible (i.e. in repeat measurements identical) measuring results.Number of tests: 50
Red Sea Fish Pharm ARE21425 Saltwater Phosphate Pro Test Kit for Aquarium, 100 Tests
Manufacturer: TopDawg Pet Supply
Brand: Red Sea
Red Sea phosphate pro test kit is an advanced colorimetric test with comparator, measuring the level of phosphate in reef aquarium to an exceptionally high resolution of 0.014 ppm P-PO4. This test kit, when used in conjunction with the nitrate pro test kit, enables accurate dosing of NO3:PO4-X (biological nitrate and phosphate reducer) which is part of the complete reef care program. This kit includes a durable, chemical resistant plastic case, analytical grade glass vials and enough materials for up to 100-tests.
Manufacturer: Zoo Med Laboratories
Brand: Zoo Med
Aquatic Turtle Kits come with a care book, .35oz (10g) Turtle Treat, 1.9oz (54g) pelleted Aquatic Turtle Food, 4.25oz (121g) bottle of ReptiSafe water conditioner. Available in an adult turtle and hatchling turtle kit.
For monitoring proper dosage of CO2. Depending upon aquatic plants and their growth conditions, the amount of CO2 required changes dramatically. Drop Checker is an original glassware unit, designed to indicate the CO2 amount diluted within the water with color change of the pH reagent inside, in order to understand the proper amount of CO2 supply. You can easily judge the proper CO2 supply by comparing the color of reagent with pH color test card Here are the instructions: 1. Unmarked bottle contains the 4dkh fluid used to accurately test the co2 level of your aquarium. 2. Fill the drop checker with the 4dkh fluid until the drop checker is half full. 3. Wait a couple hours for the color to change from blue to green/yellow as result. Co2 diffuser, co2 drop checker, glass drop checker, co2 aquarium, co2 aquarium kit, co2 aquarium