DM-2EC Comercial En-LÃnea Dual Monitor de la CE, 0 a 9.990 mS Rango, +/- 2% Lectura PrecisiÃ³n
SPECIFICATIONS Range:Â 0-9990Â ÂµS Accuracy:Â Â±2%Â Cable Length:Â 46" (including sensor), shielded cables Sensor:Â Dual, 1/4" diameter for quick-connect fittings (modelÂ SP-3, included) Digital Calibration:Â Digitally factory calibrated to 1413Â ÂµS. Re-calibration can be done separately for each line.Â Power source:Â 2 x AA batteries (included)Â Battery life:Â Approx.Â 2 yearsÂ Size:Â 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.)Â Weight:Â 201.3 g (7.1 oz.)
PH monitor controller water test kit 2 in 1 PH aquarium fresh marine fish tank
Brand: Water Test, Treatment
Color: PH monitor
Features:Power Specifications: AC110~240v world wide useFrequency: 50 / 60HzDisplay: 0.56-inch large LED displayPH test range: 0-14PH control range: 3-11PH Resolution: 0.1PHPH Accuracy: Â¡Ã€ (0.1% + 2digits) (corrected)External adjustment: External PH7, PH4 (CAL)Using the temperature and humidity limits: 0 Â¡Ã£ ~ 50 Â¡Ã£ C humidity below 90% RHHost Size: Width 8.5cm, height 15cm, 4cm thickStandard accessories: PH controller (LED display) 1, the host 1 set of pylons, PH7.0 and PH4.0 each calibration solution 1 bottle, PH electrode rod 1, electrode rod hanging bracket 1 set Manual 1.Use :( see instructions)Cleaning and maintenance1. Clean the electrodes, please unplug, turn off the power.2.PH electrode placed in water, can not exceed the height of the electrode cap regularly within a month with a soft brush to clean, when not in use, please put electrodes are placed inside the envelope there is the storage solution, if crystallization are normal phenomenon.3.PH electrode is a precision glass products, do not knock.4. Keep hands, cloth and other items alcohol wipe PH electrode.5. This product is for indoor use only.Attencion:The PH control function need to work together with CO2 system and Calcium ReactorMade in TaiwanPackage include:1 pcs UP813 PH monitor controller 2 in 1
Water Test Ed Kit, pH, Dis O2, Nitrate, etc by LaMotte
No other test kit on the market compares to this low-cost, portable, easy-to-use water testing kit. Students will have fun analyzing sample water for eight different test factors. Comes complete with all the necessary apparatus, nonhazardous TesTabsÂ®, diagrammed, step-by-step instructions and color chart. Use this kit to explore the water quality of natural aquatic systems nearby. Contains everything you need to test for phosphate, temperature, turbidity, coliform bacteria, pH, dissolved oxygen, biochemical oxygen demand, and nitrate. Can be used to test fresh, brackish, or saline aquatic environments. Enough materials for 5-6 students. Grade 4 and up
This professional set consists of eight different water tests for saltwater aquarists. Contains the following tests: pH value carbonate hardness ammonium/ammonia nitrite nitrate phosphate iron copper calcium
Manufacturer: Paint Test Equipment
Brand: Paint Test Equipment
The Bresle Chloride Test Kit is one of the most popular tests for extracting and measuring the salt contamination on blast-cleaned substrates. This Chloride Test on steel or Salt Test on steel using the Bresle Patch or Bresle Sampler method will help to prevent coating failure due to salts such as chlorides and sulphates contaminating the surface prior to the coating application. This contamination can be tested quickly and simply using the Bresle Test. Easy to use, pour 10mls of distilled water into the beaker and determine the conductivity using the Conductivity Meter. Take a Bresle Patch and apply to the test surface. Fill the syringe with 2.5mls of test water and insert through the adhesive foam into the test chamber. Inject the contents, then extract back into the syringe. Repeat ten cycles of injecting and extracting, then transfer the test water back into the beaker. Measure the test water with the Conductivity Meter and deduct the initial conductivity reading from the result. Multiply the readings by 0.4 to give the quantity of salts in g/cm also known as ppm, or by 4 for the quantity of salts g/m. The maximum permissible surface density of salts on the steel surface prior to surface treatment depends on the type of paint to be applied and what the finished material or product is to be used for. Surface treatment specifications must, therefore, state the highest permissible surface density of salts for each particular application. Complies with International Standards: ISO 8502-6 and ISO 8502-9. Additional packs of Bresle Patches can be purchased to carry out further tests using this kit. Supplied with 50 Bresle Patches, Conductivity Meter, Calibration Solution, 3 5ml Syringes, 25ml Beaker, 250ml Distilled Water and Carrying Case.
The Allegro Flow Test Kit with CFM tester checks the volume of air that gets to the respirator. A flow meter simply quick connects onto an airline hose to check the respirator system for NIOSH compliant air flows. The kit contains flow meter and a full assortment of quick connect plugs and adapters to fit all respirator manufacturer's airline hoses. This is excellent for use with ambient air pumps. NOTE: NIOSH mandates 4 CFM for tight-fitting masks and 6 CFM for hoods.Do you order this product often and/or in large quantities? Check out our Large Order Program to save yourself time and money.If this isn't what you're looking for, please check out the rest of our supplied air respirator category.
Manufacturer: Wildlife Supply Company
Brand: Wildlife Supply Company
4120-A15 Ammonia Nitrogen KitFor fresh or salt water, this Nessler Method kit contains octa-slide and enough reagent for 50 tests. Range is 0.2 - 3.0 (0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0, 3.0) ppm NH3-N, which is frequently used in aquaculture. Above image may vary.
Technical Specification Item Arsenic Test Kit Type Test Kit Range 0.05 - 0.5 mg/L Sensitivity 0.05 mg/L Number of Tests 100 Includes Reagents Compliance & Restrictions Compliance and Restrictions Hazardous material - Other Regulated Material This item has been restricted from sale in the following states: CA. This listing is for each. _DELETE_
The Aqua Medic Calcium Reactor 1000 is a closed system designed for universal use. It can be operated on a bypass system, independent of the water level in the aquarium, or alternatively be installed in the filter sump. It includes a large volume (10 liters or c. 2.5 gallons) of Hydrocarbonate and an integrated circulation pump that features the patented Aqua Medic needle wheel. By adding CO2, the pH value in the Calcium Reactor falls and the Hydrocarbonate is dissolved. Even with a low flow rate of 1 to 4 l/hr (c. 0,25 to 1 gph), a large amount of dissolved calcium enters into the aquarium, which is assimilated by the animals. The Calcium Reactor 1000 has an integral port to accommodate a PG 13.5 threaded electrode to measure the pH value.