Co2 Diffuser Atomizer For Water Plants Dual Suction Cup L Aquarium Plastic Tank Reactor
Manufacturer: Fashion Life
Brand: Fashion Life
Description: 1. Super diffuse efficiency to get the best CO2 dissolved effect. 2. Designed for screw lock on the CO2 tube, no need to worry the tube loose off by the pressure and caused damage. Note: We recommend you to install the atomizer at the bottom of the aquarium to get the best dissolved effect. Color: Black. Size: 5.5 x 4 x 3.5 cm. Material: Plastic. 1 x CO2 Diffuser Atomizer.
Red Sea Fish Pharm ARE21465 Marine Care Program Nitrate/Nitrite Kit for Aquarium, 60/100 Tests
Manufacturer: TopDawg Pet Supply
Brand: Red Sea
Red Sea nitrate/nitrite combi-test kit provides 160 nitrite or 100 nitrate plus 60 nitrite advanced colorimetric tests for marine aquariums to an accuracy of 0.05 ppm or 2 ppm. Performs 60/100 tests. It range is 0-1 ppm or 0-250 ppm.
â€¢Allows you to monitor the CO2 level in your tank . â€¢Unique design prevents any chance of spilling the indicator solution. â€¢Reusable color chart sticker allows the constant repositioning of the position of the label on the aquarium.
Red Sea Fish Pharm ARE21410 Saltwater KH/Alkalinity Pro Test Kit for Aquarium, 75 Tests
Manufacturer: TopDawg Pet Supply
Brand: Red Sea
Red Sea alkalinity test kit includes an accurate titration test for KH monitoring these essential parameters in all marine aquariums to an accuracy of 1 dKH / 0.36 meq/L. Alkalinity Pro is a high accuracy (+/- 2.5ppm) Titration test Kit (75-tests) includes professional titrate.
Red Sea Fish Pharm ARE21465 Marine Care Program Nitrate/Nitrite Kit for Aquarium, 50/100 Tests
Manufacturer: Red Sea Fish Pharm
Brand: Red Sea Fish Pharm
The Red Sea Marine Care Program Nitrate/Nitrite combi-test kits are accurate advanced colorimetric tests. The Nitrite accuracy is .05 ppm and the range is 0 - 1 ppm.The Nitrate accuracy is 2 ppm and the range is 0 - 250 ppm. The kit includes either 160 Nitrite test or 100 Nitrate plus 60 Nitrite tests.
Salifert Copper Profi-Test Copper is often used as a treatment for parasite infested fish and it is essential that the correct concentration is used as too high levels can be toxic to marine fish and invertebrates. Tap water can also be naturally high in copper and it is therefore advisable to test for this on a regular basis. The Salifert test kit offers a very sensitive and accurate test for measuring dissolved or weakly chelated copper with a pH of 7.5-9. Lasts for several copper cures or provides sufficient for up to 50 tests on tap or aquarium water as a routine check. Ca be used for marine, fresh and garden pond water Strongly chelated copper will only be partly or not at all detected.Warning!KEEP OUT OF REACH OF CHILDREN. Not for consumption.Instructions: Add 2ml of water in the test vial. Add 5 drops of the Cu reagent and swirl gently for 5 seconds. Allow it to stand for 10 minutes. Some copper medications might use strongly bound copper and would require a waiting time of 20 minutes. In case of doubt compare the value after 10 and 20 minutes of waiting. The highest value should be noted. To obtain the copper concentration hold the test vial in front of you. Place the white part of the color chart firmly against the side of the test vial and look from the opposite side.A blue tinge lighter than the 0.1ppm value corresponds to approximately 0.05ppm.A color in between two color bars indicates a copper value in between those two values.Copper Table ml`s Added Copper Concentration in ppm 1 >=1.0 2 0.50 3 0.33 4 0.25 5 0.20 10 0.10 15 0.07 20 0.05
Salifert test kits are the epitome of accuracy and precision. Their wide range of available tests have all been designed to detect the smallest traces of certain elements, without interference from other chemicals within the water. Simply put, these are the best test kits you can buy- hands down. The sharp, contrasting color changes make results easy to read so there's no second guessing. Trust your aquarium to Salifert.This test will accurately measure the form of iodine found in seawater, iodate. Saltwater test. THIS ITEM IS NOT AVAILABLE FOR BACKORDERS
The Aquascape KH/Alkalinity Test Kit measures KH and Alkalinity concentrations in ponds and aquariums. This easy-to-use kit provides accurate, laboratory-quality testing that is simple to complete with the provided step-by-step instructions. This package (model 96019) includes 60 tests and all necessary components. Carbonate hardness or KH/Alkalinity has an intricate relationship with pH and the buffering capacity of pond or aquarium water, making it important to monitor in certain ponds. The Aquascape KH/Alkalinity Test Kit is also ideal for optimizing the benefits provided by the Aquascape IonGen System. Aquascape is passionate about the products we produce, providing unique products, designs, and features that stand above the competition.