Neptune Systems AquaController Apex Display Module
Mechanical, not membrane keypad
Our Display Module uses high-quality, mechanical buttons. So what you say? Well many devices out there make use of what are called capacitive touch pads. This type of membrane button is just fine for your toaster oven, but in a saltwater environment it is highly susceptible to failure. So, even though the cost to us was higher, we went with mechanical buttons for our Display Module ensuring your product a much longer life.
Adjustable contrast, high-resolution,
backlit graphic display
While some may tout the importance of a color display, we disagree. We believe the most important thing for our customers is ease in readability and size of the display. What good is a color display if it is barely larger than a postage stamp. That is why we went with the backlit graphical display we did. It was the perfect match of function and value for our customers.
Built-In Speaker Plays Multiple Alarm Tones
Inside the Apex Display Module is a tiny speaker with a big heart. This speaker will play one of many alarm sounds and tunes that are built into the Apex. These alarms are perfect to alert you of a water leak, over temp, or whatever you condition you desire to program into the Apex.
Multiple Display Module Capability
With the Apex Display Module you are not limited to having just one control panel. With the Apex (as an option) you can add one, two, even three control panels all to the same Apex. And, these are not watered down, smaller versions of the main control panel, all modules will have the same display and functionality.
Neptune Systems AquaController Apex PM1 PH/ORP Temp Probe Module
Neptune Probe Module PM1 is for PH, ORP, and Temperature.Apex PM1 module by Neptune Systems is designed to control or add PH, ORP, or Temperature probes to your Apex controller. * Monitor/Control pH or ORP, and temperature. * 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc. * Full datalogging support in Apex Base module. * Up to 240 AquaBus modules can be added to the Apex system. * Plug and Play. Automatically recognized when installed into the system. * Two AquaBus connectors for flexible expansion via AquaBus * Led Status Indicator * Upgradeable firmware. * Compatible with all Apex systems. * Galvanic Isolation for accurate and reliable probe readings. * Comes with 3' AquaBus cable.
NYOS MAGNESIUM REEFER TEST KITNYOS Reefer Magnesium test kits are very accurate and use just small amounts of solution making the test even more simple. If you need an accurate test kit for your reef tank the NYOS Reefer test kits are perfect for your aquarium.Water properties as close to nature are the key for every aquarium's success. However, monitoring relevant parameters in seawater is difficult due to numerous interfering ions. Therefore, test kits considering the specific characteristics of seawater are needed to analyse the water precisely.NYOS REEFER test kits offer the customer two significant benefits:Highly precise analyses for seawater conditions. Furthermore, they offer a highly attractive price-performance ration and make test kits in laboratoryquality affordable for the standard hobby user.Additional characteristics of our REEFER test kits: * calibrated dropper made by a German manufacturer ensures uniform drops during all repeat tests * reagents are made in Germany in accordance with EN ISO 9001 * reagents are analysed according to AAS and NIST standards * strict batch and quality control * easy to use with intuitive pictogram instructions * Made in GermanyNYOS REEFER test kits allows you to achieve precise and most importantly reproducible (i.e. in repeat measurements identical) measuring results.Number of tests: 50
Red Sea Fish Pharm ARE21425 Saltwater Phosphate Pro Test Kit for Aquarium, 100 Tests
Red Sea phosphate pro test kit is an advanced colorimetric test with comparator, measuring the level of phosphate in reef aquarium to an exceptionally high resolution of 0.014 ppm P-PO4. This test kit, when used in conjunction with the nitrate pro test kit, enables accurate dosing of NO3:PO4-X (biological nitrate and phosphate reducer) which is part of the complete reef care program. This kit includes a durable, chemical resistant plastic case, analytical grade glass vials and enough materials for up to 100-tests.
For monitoring proper dosage of CO2. Depending upon aquatic plants and their growth conditions, the amount of CO2 required changes dramatically. Drop Checker is an original glassware unit, designed to indicate the CO2 amount diluted within the water with color change of the pH reagent inside, in order to understand the proper amount of CO2 supply. You can easily judge the proper CO2 supply by comparing the color of reagent with pH color test card Here are the instructions: 1. Unmarked bottle contains the 4dkh fluid used to accurately test the co2 level of your aquarium. 2. Fill the drop checker with the 4dkh fluid until the drop checker is half full. 3. Wait a couple hours for the color to change from blue to green/yellow as result. Co2 diffuser, co2 drop checker, glass drop checker, co2 aquarium, co2 aquarium kit, co2 aquarium
Industrial Test Systems 481345 eXact 5 in 1 Fresh Eco-Check
Combining accuracy, affordability, and ease-of-use, our patented test strips have revolutionized water testing. They provide accurate, rapid results at an affordable cost. Designed using cutting-edge chemistries and state-of-the-art manufacturing processes, our test strips and test kits replace outdated testing kits that are labor and cost intensive.
ELOS AQUA TEST KIT- MAGNESIUMMagnesium (Mg) is present in a high quantity (1300-1350 ppm) in natural seawater. Contrary to its not only quantitative significance, this element was ignored as an important parameter of the marine aquarium for a long time. We know today that Magnesium creates a remarkable improvement in the growth of calcareous algae and also has a positive influence on the growth of invertebrates and macro algae. The ideal value of Magnesium in the aquarium is: 1100-1300 mg/Lt for the marine aquarium. Because of the importance of Magnesium, it is necessary to keep the proper level by testing it with an accurate test kit. ELOS AquaTest Mg, as well as all titrimetric test kits of this line, grant very high precision thanks to several procedures like the use of calibrated droppers with constant and predefined drops of 0.03 ml each, the validation of our reagents, through NIST (National Institute of Standard and Technology) validation and the careful stock management to supply to our customers ONLY the freshest production batch. HIGHLIGHTS: High quality system: one powder reagent and two liquids! Standard sensibility: 100 ppm of Magnesium ions. NIST validation: each batch of reagents is validated using NIST (National Institute of Standard and Technology) samples "C" reagent available as separate sales unit High number of test per kit: up to 50 test (with a standard Mg level of 1100 ppm) "Safe reagents": reagents and testing procedures are based on Low Risk Reagents. None of our test kits are based on Toxic Reagents.
Aquarium Hydroponic PH controller meter Electrode Probe BNC Connector
Condition: 100% Brand new
pH range: 0-14pH
Temperature range: 0-60 °C
Cable length: 70cm
BNC connector, suitable for most pH meter and controller with BNC connector.
Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.
1pc pH electrode probe