ADA Fish Celsius and Fahrenheit for Aquarium Thermometer-External Double-Display
◆ Specifications: *Color:Black *Condition: 100% brand new *Housing: Plastics *Mode:Simultaneously showing aquarium and Ambient temperature *Type of battery:1*Button Battery *Low consumption: Brand news batteries can provide the life of feeder over 6 months. *With adhesive tape at back side for easy putting on aquarium tank *Large LCD display *Selectable temperature unit:℃or℉ ◆ Operating Manner *1.Ambient-10~+50℃（14~122℉） *2.Aquarium-50~+70℃(-58~158℉) *3.Resolution:0.1℃/0.1℉ *4.Accuracy:±1℃(2℉) ◆ Placing & Installing With adhesive tape at back side for easy putting on aquarium tank Simultaneously showing aquarium and Ambient temperature ◆ Packing Quantity 1xADA Thermometer-external double-display 1xButton Battery 1xUser manual
Nitrate is one of the final products of biological removal of ammonia. While it is not toxic, levels above 10 PPM will inhibit coral growth and may irritate invertebrates. High levels will indicate not enough water changes, too high a fish load or in marine applications, not enough area for denitrifying bacteria to live. This test kit includes a test vial, two reagents and a color chart to determine the amount of total nitrate in the aquarium. There are two scales on the chart measuring 0.2 to 10 PPM and 2 to 100 PPM (Mg/L). This test kit will do 50 tests.
Insten 200W 110-120V Adjustable Aquarium Fish Tank Water Heater with FREE Black LCD Digital Fish Tank Aquarium Thermometer
Valued Combo includes: 1 x 200W Water Heater + 1 x Digital Fish Tank Thermometer 200W WATER HEATER: Suggested water volume: 53gal. Range of temperature adjustment: 20~34°C. Power: 200W. Voltage: 110V-120V. DIGITAL FISH TANK THERMOMETER: Broad temperature range of -50°C to +70 °C. Switch between °C and °F. Powered by one 1.5V LR44 button cell battery (NOT included). NOTE: Please do not submerge thermometer in water when measuring the temperature SIZE: (Thermometer) 5.8-cm x 3.7-cm x 1.7-cm/ 2.28-inch x 1.46-inch x 0.67-inch. (Thermometer) CABLE LENGTH: 97-cm/ 38.12-inch. (Heater) length: 29-cm/ 11.4-inch. (Heater) Cable length: 103-cm/ 40.6-inch. INSTEN® is a registered trademark. Only authorized seller of INSTEN® can sell under INSTEN® listings.All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
ISTA Twin Display Thermostat 500W/300W/100W Heater 50~500 FISH TANK Salt Water (I-H791 -500W)
Installation: 1. For aquarium in-door use only. 2. Check power supply, power outlet, and voltage in comply with rated values. 3. To set desired temperature, turn the adjustment knob of Thermostat to the desired temperature. 4. Put Heater into aquarium, submerged in full, at a position with good water circulation. (Refer Figure) Note: 1. Fix Heater body with suction cup into water. 2. Plug Thermostat into Power outlet, the pilot green will come on. The pilot red light will come on for timer the heater is heating. Temperature is achieved when heat source light turns on and off. 3. To avoid inaccurate detection, the Heater must be completely immersed in the water. 4. Do not mount Thermostat in areas subject shock, vibration, high temperature, moisture, or rain. In case Thermostat body dropped into water or invaded by water, disconnect the power as soon as possible, and then bring this product to authorized shop for repair. 5. For your safe and avoid the dangerous, please cut off the power before changing water and off the aquarium and wait for 15 minutes to move. 6. The most depth it can reach is 1 meter. 7. In order to ensure safety reason, please pay attention to the change of the temperature in the water for the first 2 days. 8. For safety reason, please don't disassembly the Thermostat or Heater by yourself.
KollerCraft TOM 18-watt Replacement UV Sterilizer Lamp for RP90 Filter
For use with RP90 Rapids Pro Filter with UV Sterilizer, this replacement 18-watt UV sterilizer lamp effectively removes unsightly green water and aids in removing harmful parasites. It's easy to install. For best results, change the UV bulb every 8 to 12 months. In addition to its popular desktop aquariums, KollerCraft also offers TOM aquarium filters and accessories, as well as Repitat reptile habitats.
Aquarium Planted Tank DIY CO2 System D301 CO2 Generator
Feature: â-Promoting plants growing, easy to set up, low cost, safe. â-With 2 air-pipe locks on the bottle cap, prevent the air-pipe get loose. â-Specialized pressure gauge, safe area and scale can be seen clearly. â-The complete DIY CO2 kit combo for planted aquarium. You can built up your CO2 system within 15 mins. â-This bottle cap is very well suitable to be DIY CO2 system 's accessory that the size fits common PET plastic bottle. Attention: â-The bottle have to use carbonated beverage bottle, do not use pulpy, green tea, mineral water bottles, etc. â-Trimming valve regulation avoid by sudden big or small, do not suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle. â-Make sure carefully observe the direction of the parts before assembly. The usual wrong handle way will cause abnormal react ion components as follow: the contrary direction of the check valve and fine-tuning in the direct. Product Attributes: Model: D301 Model Thumbnail Vavle Pressure Gage Cover Tube D201 D301 D501 Package Include: 1x Pro needle valve 1x Pressure gauge 1x Extra tube 2x Bottle caps with tubes 2x Tube holder If you want to set up the Generator ,you need (not included in the product): 1x 200g of citric acid 1x 200g baking soda powder 2 x Soft drink bottle (recomended 2L bottle) Note: 2.Due to the light and screen difference, the item 's color may be slightly different from the pictures. Please understand. Make sure you don 't mind before you bid. 3.Please allow 1-5mm differences due to manual measurement. How you to set up
Zoo Med Digital Aquarium ThermometerDigital Aquarium Thermometer is fully submersible. Digital readout faces forward in the tank. Suction cup secures the thermometer to the glass. Replacement battery included.